As mentioned in a previous post, wood is more among the strongest materials per unit weight, making it ideal for table tops and telephone polls. On a per pound basis, most species of wood are more than twice as strong as aluminum or mild steel. Wood’s structure is is the reason; it’s a natural composite of air-filled, aligned tubes of crystalline cellulose, held together by natural glue, lignin.
In terms of raw strength though, pounds/in2, wood is not particularly strong, only about 7000 psi (45MPa) both in tension and compression, about half the strength of aluminum. It is thus not well suited to supporting heavy structures, like skyscrapers. (I calculate the maximum height of a skyscraper here), but wood can be modified to make it stronger by removing most of the air, and replacing it with plastic. The result is a stronger, denser, flexible composite, that is typically transparent. The flower below is seen behind a sheet of transparent wood.
To make a fairly strong, transparent wood, you take ordinary low-density wood (beech or balsa are good) and soak it in alkali (NaOH). This bleaches the wood, softens the cellulose, and dissolves most of the lignin. You next wash off the alkali and soak the wood in a low viscosity epoxy or acrylic. Now, put it in a vacuum chamber to remove the air — you’ll need a brick to hold the wood down in the liquid. You’ll see bubbles in the epoxy as the air leaves. Then, when the vacuum is released, the wood soaks up the epoxy or acrylic. On curing, you get a composite strong and transparent, but not super strong.
To make the wood really strong, super-strong, you need to compress the uncured, epoxy soaked wood. One method is to put it in a vice. This drives off more of the air and further aligns the cellulose fibers. You now cure it as before (you need a really slow cure epoxy or a UV-cure polymer). The resultant product have been found to have tensile strengths as high as 270 MPa in the direction of alignment, over 40,000 psi. This is three times stronger than regular aluminum, 90 MPa, (13,500 psi). It’s about the strength of the strongest normal aluminum alloy, 6061. It’s sort of expensive to make, but it’s flexible and transparent, making it suitable for space windows and solar cells. It’s the lightest flexible transparent material known. It’s biodegradable, and that’s very cool, IMHO. See here for a comparison with other, high strength, transparent composites.
Robert Buxbaum, November 10, 2022. I think further developments along this line would make an excellent high school science fair project, college thesis, or PhD research project. Compare different woods, or epoxies, different alkalis, and temperatures, or other processing ideas. How strong and transparent can you make this material, or look at other uses. Can you use it for roof solar cells, like Musk’s but lighter, or mold it for auto panels, it’s already lighter and stronger, or use it as bullet-proof glass or airplane windows.
