Furnaces and Thermocouples
Furnaces | ||
Uniform heat, vertical tube furnace with temperature controller. For use with 20" membrane reactor, or for general laboratory applications. Maximum use to 1100°C, 120 or 240 Volt operation; 10" x 15" x20" tall; heated zone is 1.75" ID by 12" tall. Extra windings at the ends of the heated zone make the temperature more uniform. See safety certification . Includes a secondary K-thermocouple ouput on the side for connection to an automatic temperture monitor. |
$6,000. | |
Thermocouples and Ts | ||
High temperature, three point thermocouple, 24" long by 1/8" or 16" x 1/16" OD; K type, inconel shieth. Measure temperature at three points inside a reactor. Temperature is measured at the thermocouple tip, at 4" up, and at 8" up. |
$800. | |
3 point thermocouple in a " Thermocouple T". High temperature, three point, K-type thermocouple; 1/8" OD or 1/16" inconel shieth, wires extent from the side through a 3/4" swagelok "T". Allows detailed temperature measurements inside the reactor while not interfering with flow or the ability to add and remove catalyst. Temperature is measured at the thermocouple tip, at 4" up, and at 8" up. |
$1,200. |